MC103 Brass Misting Nozzle
Use to cool temperatures up to 25°using 1/2 GPH ofwater @ 40 PSI.
Each Nozzle includes an O-ring for a leak proof assembly.
Compatible with all MIST&COOL® fittings.
10-24 UNC 2A male thread. Maximum PSI 1500
MC190C Nozzle Plug
Use to close-off unneeded misting outlets.
Plugs come with O-rings for a positive seal.
10-24 UNC 2A male thread. Maximum PSI 300
MC115 Flexi-Mist
Compatible with all Mist & Cool systems. Flexi-Mist consists
of six-inch misting arms with nozzles (MC103), it easily
attaches to misting tees or elbows. Flexi-Mist provides
exact directional control of mist and allows for hidden
installations behind facia board.
Inlet: 10-24 UNC 2A Male Thread Maximum PSI 300
MC113C Misting Tee w/ Nozzle
Misting nozzle (Part# MC103) mounted in a 3/8"
compression nozzle tee for quick installation. Use with
.250" I.D. x .375" O.D. polyethylene tubing only.
3/8" Compression x 3/8" Compression Maximum PSI 250
MC134C Misting Elbow w/ Nozzle
Misting nozzle mounted in a 3/8" compression elbow
for quick installation. Use with .250" I.D. x .375" O.D.
polyethylene tubing only.
3/8" Compression Maximum PSI 250
MC313C Misting Tee w/o Nozzle Use to connect misting nozzles to 3/8" polyethylene tubing.
Use with .250" I.D. x .375" O.D. polyethylene tubing only.
3/8" compression x 10-24 UNC female thread x 3/8"
compression Maximum PSI 250
MC334C Misting Elbow w/o Nozzle
Use to connect misting nozzles to 3/8" polyethylene tubing
at the end of the line. Use with .250" I.D. x .375" O.D.
polyethylene tubing only.
3/8" compression x 10-24 UNC female thread.
Maximum PSI 250
MC322C Compression Coupler Use to join two pieces of 3/8" polyethylene tubing. Use with
.250" I.D. x .375" O.D. polyethylene tubing only.
3/8" compression x 3/8" compression Maximum PSI 250
MC316CCompression Tee
Use to run separate lines off 3/8" polyethylene tubing. Use
with .250" I.D. x .375" O.D. polyethylene tubing only.
3/8" compression x 3/8" compression x 3/8" compression
Maximum PSI 250
MC336CCompression Elbow
Use to make sharp turns with 3/8" polyethylene tubing. Use
with .250" I.D. x .375" O.D. polyethylene tubing only.
3/8" compression x 3/8" compression Maximum PSI 250
MC357C Compression x 3/4" FHT Adapter
Use to connect 3/8" polyethylene tubing to 3/4" male hose
thread water source. Use with .250" I.D. x .375" O.D. poly-
ethylene tubing only. Available in BSP threads. 3/4" female hose
thread x 3/8" compression-lock. Maximum PSI 250
MC392C 3/8" Wood Mounting Clamps
Use to secure 3/8" leader or misting line to wood surfaces.
Includes case hardened steel nails.
MC393C 3/8" to 1/2" Stucco Mounting Clamps
Use to secure 3/8"-1/2" leader or misting line to stucco
surfaces. Includes anchors and screws.
MC601 Poly-Phosphate Filter
Calcium and mineral reducing filter helps keep nozzles clean
in areas with hard water. Attaches directly to your 3/4" hose
bibb. Contains a five micron sediment filter with poly-phosphate
element Inlet: 3/4" FHT Outlet: 3/4" MHT
Maximum PSI 125
MC616 Y- Connector with Dual Shut-Offs
Use to provide two regulated hose thread outlets off of one 3/4"
hose bibb. Inlet: 3/4" FHT, Outlet: two 3/4" MHT.
Maximum PSI 250
MC620 3/4" Automatic Drain
Use to drain misting system when water is turned off. Available
in BSP threads. Inlet: 3/4" FHT, Outlet: 3/4" MHT.
Maximum PSI 125
Dealer
Live Support
Contact Us